Waters 1515 Isocratic HPLC Pump Solvent Management System (4974)

Description

Waters 1515 Isocratic HPLC Pump Solvent Management System (4974)w
Good cosmetic condition.
Unit powers on. Unable to test further. May require calibration.  See pictures for more detail
Manufacturer: Waters
Model #: 1515 I
socratic HPLC Pump
Description
: The 1515 features and integrated, high-pressure binary pump with on-board pulse dampening and efficient mixing. Its pulse-free solvent flow with analytical to semi-preparative flow rates are well suited for high sensitivity detectors.  Designed for use with 2 to 4.6 mm I.D. columns in routine HPLC applications, the pump has a programmable flow-rate range of 0.00 to 10.00 mL/min in 0.01 mL increments
Solvent Management System
Features:
Integrated, High-pressure isocratic pump
On-board pulse dampening and efficient mixing
Pulse-free solvent flow with analytical to semi-preparative flow rates are well suited for high sensitivity detectors.
Specifications:
Note*
this data was taken from an online source and may not pertain to this particular model.
Inputs:
​Ethernet
RS-232
IEEE 488
120/240 V
50/60Hz
200VA
F.3 15A / 250V
Programmable flow rate range:
​0.00 to 10.00 mL/min in 0.01 mL increments
Flow Precision:
≤0.1% RSD or 2 sec SD, six replicates, based on retention time or volumentric measures, at 1.0mL/min, 1000 to 2000 psi backpressure, PQ test (each pump individually)
Maximum Operating Pressure:
​6000 psi (41,370 kPa, 401 bar)
Operating pressure limits
​Software programmable high and low pressure limits; user selectable in psi, kPa, bar
Pressure ripple (one pump):
≤2.0% at 1.0 mL/min, degassed methanol, at 1000 psi backpressure
Gradient Ripple:
​< 1.5% normalized to full scale between 10% to 90%, 1.0 mL/min, and 1000 psi backpressure (methanol: methanol with propylparaben with one GM 150 mixer)
Integral vacuum degasser to remove dissolved gases from the mobile phase, improving performance and reliability
Automated seal wash helps extend the primary seal life for reliable operation
Manual injector
Crating Fee:
Sold as is with 30 day Right of Return, only pictured items included
Easy return/refund for any reason
Anacapa Equipment
RETURNS
Anacapa Equipment Brokers, Inc. (“Seller”) strives to offer excellent customer service.   You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent.  We DO NOT ship internationally.  If you are using a freight forwarder then returns are VOID.
SHIPPING
All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment.  We only charge actual shipping cost.  If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost.
We DO NOT ship internationally.  IF you are using a freight forwarder then returns are VOID.
LIMITED WARRANTY
Buyer acknowledges that the equipment is being sold “as is" and without any warranty of merchantability or fitness for a particular use.  The entire risk as to the quality and performance of the equipment is with the Buyer.  Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair.  Buyer may inspect the equipment prior to purchase and placement of the order.  Failure to inspect prior to placement of an order is deemed a waiver of Buyer’s right to inspect.  Buyer is responsible for determining the suitability of the equipment for its application.  Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased.
The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty
.
INDEMNITY
Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (“Indemnitees”) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller.  The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws.  Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California.
Pictures sell!
Auctiva offers Free Image Hosting and Editing.
The complete eBay Selling Solution.
Track Page Views With
Auctiva's FREE Counter